欢迎来化易天下 | 免费注册

全部分类
快速跳转

购物车

请先登录

压力容器型式试验

化工产品 阅读:164 时间:2023-10-30 12:45:15

1人参与回答 分享

化易AI

2023-10-30回答

GB/T 5169.14-2008 Fire hazard testing for electric and electronic products - Part 14: Glowing/hot-wire based test methods - Glow-wire apparatus and common test procedure 电工电子产品着火危险试验 第14部分:发热丝/热丝基本试验方法 发热丝装置和常规试验程序 GB/T 5169.17-2008 Fire hazard testing for electric and electronic products - Part 17: Test flames - 50W horizontal and vertical flame test methods 电工电子产品着火危险试验 第17部分:试验火焰 50W水平和垂直火焰试验方法 GB/T 5169.18-2008 Fire hazard testing for electric and electronic products - Part 18: Test flames - 500W horizontal and vertical flame test methods 电工电子产品着火危险试验 第18部分:试验火焰 500W水平和垂直火焰试验方法 GB/T 5169.19-2008 Fire hazard testing for electric and electronic products - Part 19: Test flames - 50W horizontal and vertical flame test methods for surface spread of flame 电工电子产品着火危险试验 第19部分:试验火焰 50W水平和垂直火焰表面蔓延试验方法 GB/T 5169.20-2008 Fire hazard testing for electric and electronic products - Part 20: Test flames - 500W horizontal and vertical flame test methods for surface spread of flame 电工电子产品着火危险试验 第20部分:试验火焰 500W水平和垂直火焰表面蔓延试验方法 GB/T 5169.21-2008 Fire hazard testing for electric and electronic products - Part 21: Test flames - 50W horizontal and vertical flame test methods for materials 电工电子产品着火危险试验 第21部分:试验火焰 50W水平和垂直火焰材料试验方法 GB/T 5169.22-2008 Fire hazard testing for electric and electronic products - Part 22: Test flames - 500W horizontal and vertical flame test methods for materials 电工电子产品着火危险试验 第22部分:试验火焰 500W水平和垂直火焰材料试验方法 GB/T 5169.23-2008 Fire hazard testing for electric and electronic products - Part 23: Test flames - 50W horizontal and vertical flame test methods for end-products 电工电子产品着火危险试验 第23部分:试验火焰 50W水平和垂直火焰成品试验方法 GB/T 5169.24-2008 Fire hazard testing for electric and electronic products - Part 24: Test flames - 500W horizontal and vertical flame test methods for end-products 电工电子产品着火危险试验 第24部分:试验火焰 500W水平和垂直火焰成品试验方法 GB/T 5169.25-2008 Fire hazard testing for electric and electronic products - Part 25: Test flames - 50W horizontal and vertical flame test methods for materials and end-products 电工电子产品着火危险试验 第25部分:试验火焰 50W水平和垂直火焰材料和成品试验方法 GB/T 5169.26-2008 Fire hazard testing for electric and electronic products - Part 26: Test flames - 500W horizontal and vertical flame test methods for materials and end-products 电工电子产品着火危险试验 第26部分:试验火焰 500W水平和垂直火焰材料和成品试验方法 GB/T 5169.27-2008 Fire hazard testing for electric and electronic products - Part 27: Test flames - 50W horizontal and vertical flame test methods for cables 电工电子产品着火危险试验 第27部分:试验火焰 50W水平和垂直火焰电缆试验方法 GB/T 5169.28-2008 Fire hazard testing for electric and electronic products - Part 28: Test flames - 500W horizontal and vertical flame test methods for cables 电工电子产品着火危险试验 第28部分:试验火焰 500W水平和垂直火焰电缆试验方法 GB/T 5169.29-2008 Fire hazard testing for electric and electronic products - Part 29: Test flames - 50W horizontal and vertical flame test methods for components 电工电子产品着火危险试验 第29部分:试验火焰 50W水平和垂直火焰部件试验方法 GB/T 5169.30-2008 Fire hazard testing for electric and electronic products - Part 30: Test flames - 500W horizontal and vertical flame test methods for components 电工电子产品着火危险试验 第30部分:试验火焰 500W水平和垂直火焰部件试验方法 GB/T 5169.31-2008 Fire hazard testing for electric and electronic products - Part 31: Test flames - 50W horizontal and vertical flame test methods for printed boards 电工电子产品着火危险试验 第31部分:试验火焰 50W水平和垂直火焰印制板试验方法 GB/T 5169.32-2008 Fire hazard testing for electric and electronic products - Part 32: Test flames - 500W horizontal and vertical flame test methods for printed boards 电工电子产品着火危险试验 第32部分:试验火焰 500W水平和垂直火焰印制

问:

用什么洗锅炉能除垢

发布于2024-09-19

  • 生产方法

最优解答:在清洗锅炉时,可以选择使用中性锅炉除垢清洗剂,这是一种完全中性的除垢剂,对人体皮肤不会造成任何伤害,且无刺激性。其除垢速度较快,最快半个小时,最慢也两个小时就可以达到90%以上的除垢效果。 另一种选择是使用水质调节剂,在清洗环节中属于预处理的产品,针对超硬和高硬的水体,以不受水体当中钙镁铁锰等过渡金属离子的干扰。 在除垢剂的选择上一定要挑选安全稳定的中性除垢剂,避免在清洗过程中因为除垢剂的原因出现人工受伤的事故。 此外,具体的清洗步骤如下: 1. 打开锅炉排污阀,放掉锅炉中的水。注意排放的水不能直接排入阴沟或地下管道。 2. 使用锅炉阻垢剂或锅炉清洗剂,将锅炉内部进行清洗。这些化学剂能够分解和溶解水垢,使其变为易于清除的颗粒或溶解物质。在清洗过程中应按照使用说明添加适量的化学剂,并根据化学剂的种类和浓度进行预处理和保护,以防止锅炉内金属材料被侵蚀。 3. 冲洗锅炉内部,去除落下的水垢颗粒和化学剂残留。使用高压水龙头或高压清洗机,对锅炉内部进行彻底冲洗。如果需要清洗的部位较难到达,可以考虑拆卸相关管路以进行更彻底的清洗。 4. 填充新水,加药剂,进行防腐和防垢处理。填充新水之前,一定要对锅炉内部进行干燥,容器内和炉内要清理干净。在填充新水前添加一定比例的药剂,通常是缓蚀剂和缓蚀杀菌剂,以防止水垢再次形成。 以上信息仅供参考,建议咨询专业人士获取更准确的信息。

查看详情
  • 化易天下咨询

    极速响应

    客服全天候快速响应

  • 化易天下销售

    专属服务

    专属顾问全程1对1服务

  • 化工品交易市场

    海量客户资源

    客户资源连通上下游

  • B2B化工交易

    科技先行

    科技信息化服务

  • 化工贸易金融服务

    买卖无忧

    商家认证和风控模型

  • 化工仓储服务平台

    一站式服务

    交易物流仓储服务